Smart home ZW37 Z-wave 2 Channel ON OFF Repeater Plugin Socket

Place of Origin:
Guangdong, China (Mainland)
Brand Name:
EVA LOGIK
Model Number:
ZW37
Type:
Electrical Plug, Plug with Socket
Grounding:
Self Grounding
Rated Voltage:
120VAC,60Hz
Rated Current:
10A
Application:
Residential / General-Purpose, Residential / General-Purpose
Color:
white
Product name:
socket Plugin Switch ON/OFF 2 channel
Switch Type:
Push Button
Material:
Plastic
size:
83*67*32.5mm
Certificate:
UL/FCC/Z-Wave plus
Feature:
Scene, S2
Frequency:
908.42 MHZ.
Packaging Details
Packaging Details

Neutral packing
Delivery Time
Samples within 2 weeks, mass order 4~6 weeks
Product Description
Brand
EVA LOGIK
NO.
ZW37
color
white
Size
83*67*32.5mm
Operating Voltage
120vac/60Hz
Range
Min 30m line of sight
Relay
10Amp*2
Frequency
908.42MHz
Standard/Approval
UL/FCC/Z-wave Certified
Maximum load of outlet
10A,1200WResistive
Maximum load of the Z-wave controlled outlef
600W lncandescent, ½ HP Motor or 1200W Resistive
Range
Up to 100 feet line of dight between the Wireless Controller
Operating Temperature Range
32-104° F (0-40° C) For indoor use only
chip
Z-wave plus
Protocol
Z-wave
Shipping
Fedex,DHL,UPS, TNT,Post Air mail,By sea,By air
Port 
Shenzhen/Guangzhou
Payment term
30% deposlit T/T in advance,70% balance before shipment
Payment Methods
Bank transfer(T/T), Paypal, Western Union, MoneyGram, LC and etc.
Installation

1.Getting To Know Your New Z-Wave Device
Must not exceed 600 watts (Incandescent): 1200W (10A) Resistive or ½ HP
Motor. Total load capacity for both outlets is 1200W (10A) Resistive.
• One Z-Wave controlled AC outlet for standard incandescent light, CFL/LED, fans or small appliances
• Remote ON/OFF control via the Z-Wave controller
• Manual ON/OFF control with the front panel push button
• One always-on pass-through AC outlet
• Space efficient design
• Does not block the lower outlet when plugged into the upper outlet of a duplex wall receptacle
(This assumes that the duplex receptacle is mounted with the ground pin down).
• Plugs and cords for connected devices route to the side allowing close placement of furniture
• Grounded 3-wire power connection for safety

2.
A. Z-Wave controlled outlet(1channel)
This outlet can remotely turn On/Off the connected device
B. Manual/Program button
Single press — turn the lamp On/Off
Single press — include or exclude in Z-Wave network
C. Z-Wave controlled outlet(2channel)
This outlet can remotely turn On/Off the connected device

3.Title goes here.
1. Plug the light you want to control into the Z-Wave controlled smart outlet on the wireless switch as indicated by the Z-Wave logo
NOTE: Plug directly into outlet, do not use with extension cords
2. Plug the wireless smart switch directly into an available grounded outlet (Top outlet recommend if possible).
TO return your switch to factory default:
1. If plugged in, unplug the smart switch from the receptacle.
2. Press and hold the top button for at least 3 seconds while you plug the smart switch into a receptacle.
3. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.

4.Adding device to Z-Wave network:
1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.
2. Once the controller is ready to include your device, press up and release the toggle to include it in the network.
3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.
4. The device is associated in the same group when it included in setting process.
Now you can control your Z-wave device according to groups, scenes, schedules and automation programmed. If your controller features remote access, you can now control all devices in Z-Wave network from mobile devices.
To exclude and reset the device
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.
2. Once the controller is ready to Exclude your device, press up and release the toggle to exclude it from the network.
Our product can be included and operated in Z-Wave network with other certified devices and/or other applications.

Title goes here.

5.All non-battery nodes within Z-Wave network will act as repeater.
1. Follow the instructions for your Z-Wave certified controller to include the device to the Z-Wave network.
2. Once the controller is ready to include your device,single press and release the manual/program button on the device to include it in the network.
3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.
4. The association group supports two nodes and life line function.

FAQ

1.How can I buy this Model?
—You can send e-mail to us.We are sure to reply you in 24 hours.You can also talk with us throught trade manager.If we are not online,you can leave us a message.We will reply you asap.

2.What is your warranty?
–For any of our models,we provide 12 months warranty.If the model is broken or can not work,We will prepare 0.1-0.3% etra models.If the product have been broken because of quality problem.You can send them back.You just need pay the return shipping fee.We will send you new models instead.

3.How could I get the best price?
—We do wholesale on Alibaba.We will gurantee the benefite for both sides.The price is based on quantity.And We usually offer discount for old customers.

4.How to pay ?
—Bank transfer(T/T), Paypal, Western Union, MoneyGram, LC and etc.

Our Company
Detailed Images
Packing & Delivery

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *